SUNGOO 7.01 El Manual página 13

2. Connect the MP3 player to a PC
Note for users of Windows® 98: Before connecting the MP3 player to your PC, please download
the required driver from the SUNGOO webseite (http://www.sungoo.eu) and install it.
Use the included USB cable to connect the MP3 player to an available USB port in your PC.
Note: Do not connect the MP3 player to a USB hub and do not use extension cable.
Your operating system automatically detects the MP3 player and adds to "My Computer" the removable
disk SUNGOO.
3. Disconnect MP3 player from the PC
Warning: Please follow the recommended procedure to prevent damage to the MP3 player or
data loss!
Windows® 98 (SE):
a) Double click in the lower right of the task bar, on the symbol Safely remove hardware.
b) In the Safely remove hardware window, select the MP3 player.
c) Click on the Yes button. You can now disconnect the MP3 player from the PC.
Windows® 2000/ME/XP:
a) Double click in the lower right of the task bar, on the symbol Safely remove hardware.
b) In the Safely remove hardware window under USB Mass Storage Device, select the MP3 player and
click on the Close button.
c) In the Remove a hardware component window, click on the OK button. You can now disconnect the
MP3 player from the PC.
4. Charge the MP3 player
As soon as you have connected the MP3 player to a PC, charging is started and displayed in the display
at the top right (
batter for longer than 12 hours.
The maximum battery life will be reached only after one complete discharge and charge cycle.
In the operating state, the charge status of the battery will be shown in the display at the top right ( ).
). After approx. 4 hours, the battery is fully charged (
Operating Instructions
). Do not charge the
12 EN