Complete Installation - Haier QPCA09 Manual Del Propietario Y Instrucciones De Instalación

INSTALLATION INSTRUCTIONS
CONNECT EXHAUST HOSE TO THE
4.
WINDOW PANEL
Place the Air Conditioner close to the window ensuring
there is at least 20" of clearance from the wall and
any other obstructions. Extend the hose so that it
reaches the Window Kit. Insert the Exhaust Hose
Adapter into the opening in the Window Kit and slide
it into the locking position. Ensure that the hose runs
straight to the window with no excess extension.
Important: The Air Conditioner must be vented to the
outside. Do not use a longer hose or extend the hose
included with the Air Conditioner or the unit will not
cool properly and will overheat.
49-5000468 Rev. 0

COMPLETE INSTALLATION

5.
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove the ground prong from the power
cord plug.
Do not use an adapter.
Do not use an extension cord.
Failure to do so can result in death, fire or
electrical shock.
A. Plug the power cord into a grounded 3 prong
outlet.
B. Press the Reset button on the plug to ensure
the safety plug is providing power to the Air
Conditioner.
C. Allow 20" of clearance around the Air
Conditioner for proper air circulation
D. When removing the Air Conditioner, be sure to
remove the Window Kit.
13