13. When the drying cycle is complete, the appliance will beep 5 times and switch off
automatically.
NOTE: If insufficient water is added, the appliance will beep 5 times to remind you
the sterilization time may be insufficient to disinfect the bottles and accessories.
The indicator light will flash. Press the power button to reset the appliance and
repeat steps 11 – 13. Should no action be taken, the indicator light will flash for 2
hours and then the appliance will automatically turn off.
NOTE: Any cycle can be stopped at any time by pressing the power button.
CAUTION:
If it is necessary to drain water from the base, always
POUR AWAY FROM YOU, as shown by the symbol on base.
5