Honda Power Products WJR2525 Manual De Explicaciones página 54

After operation
When handling agricultural chemicals, follow the directions of the
manufacturer or distributor. Also, follow the laws and regulations.
1. Stop the engine (see page 44).
2. After the engine cooled, remove the
drain cap to drain the agricultural
chemicals from the chemical tank.
3. Install the drain cap and remove the
chemical tank cap to pour clean water
into the tank to rinse its inside.
4. Start the engine again (see page 38) and
move the throttle lever between the
FAST position and the SLOW position
(see page 49).
Move the shut-off valve a few times.
Spray a few minutes. Remove the drain
cap again to drain the water from the
tank.
5. Fix the right-hand side nozzle pipe and sprayer hose (short) in place
with the nozzle holder, and secure them with the holder band (see
page 23).
For the left-hand side nozzle, turn the switching valve to the
CLOSED position, and remove the nozzle pipe and sprayer hose
(long) from the backpack sprayer (see page 21).
51