Honda Power Products WJR2525 Manual De Explicaciones página 58

Ocultar thumbs Ver también para WJR2525:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Changing oil
Drain the oil while the engine is still warm to assure rapid and
complete draining.
Place the backpack sprayer on a firm level surface with the engine
stopped.
1. Check the fuel tank cap is tightened securely.
2. Remove the oil filler cap and drain the oil into the oil container by
inclining the engine toward the oil filler neck.
3. Refill to the upper limit with the recommended oil (see page 29).
Add the engine oil slowly to avoid overflowing, as the engine oil
tank capacity is small.
OIL CAPACITY: 0.08 L
FUEL TANK CAP
OIL FILLER
NECK
4. Install the oil filler cap securely.
If any oil is spilled, make sure to wipe it.
Wash your hands with soap and water after handling used oil.
NOTE:
Please dispose of used motor oil in a manner that is compatible with
the environment. We suggest you to take it in a sealed container to
your local service station for reclamation. Do not throw it in the trash
or pour it on the ground, or down a drain.
UPPER LIMIT
55

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido