Honda Power Products WJR2525 Manual De Explicaciones página 71

6. Lubricate the cylinder.
a. Loosen the 4 mm hex. bolt, then remove the engine top cover
(see page 58).
b. Remove the spark plug (see page 59).
c. Apply a couple of drops of clean engine oil into the cylinder.
d. Install the engine top cover temporarily.
e. Pull the starter grip several times to distribute the oil in the
cylinder.
f. Remove the engine top cover, then reinstall the spark plug.
g. Install the engine top cover, and tighten the 4 mm hex. bolt
securely.
7. Pull the starter grip slowly until resistance is felt.
8. Cover the engine to keep out dust.
9. Store the backpack sprayer in a safe, locked place inaccessible to
children or cattle, and free of dust and humidity away from sparks.
Place a tarpaulin or plastic sheet over the machine during storage.
68