SafeWaze 019-11000 Manual Del Usuario página 9

User Manual
Step 5: If a Safewaze 3-Way Retractable, Material Winch, or Personnel Winch was installed onto
the Tripod (See specific component instructions for proper tripod mounting), the cable constiuent of
the component must be routed over and through the top of the tripod. Pull out the required amount of
cable from the component to drop through the head assembly of the tripod. Drape the cable over the
top of the tripod and slide the snap hook down through the opening in the top of the tripod where the
pulley (previously removed in Step 4) is normally seated. (See Image 5) Re-install the pulley
assemblies removed in Step 4. Ensure the component cable(s) are routed over the top of the
pulley(s). (See Image 6) The 019-11000 Tripod and subcomponents are now ready for use.
Image 5
Image 6
Pulley
Pulley
3-Way Cable
Material Winch
Cable
Page 9
V1.0 2020 Copyright SafeWaze