Cleaning And Maintenance - UFESA TW1500 Manual De Instrucciones

ASSEMBLY
CAUTION: Ensure the product is fully assembled before plugging it into an electrical outlet.
To assemble it, refer to figure: positioning first the base1 (D) then the base 2 (E) on the body, making
sure to lock with 4 screws supplied (F).
REMINDING (Fig.2): there are 2 corresponding holes at the base, the 2 pillars at the seat need to pass
through these 2 holes when assembly the base onto the fans.
USE
Before each use, verify that the unit is in good condition, the electric cord is not damaged, if the power
cord is damaged, it must be replaced by the manufacturer or a competent qualified electrician or a
person with similar qualifications, in order to avoid any risk.
Operation:
The fan can be operated by the control panel located on the top of the fan(B) or by remote
controller(A).
1. Plug the fan into the standard domestic socket.
2. Press the ON/OFF button , the fan will start running at LOW speed
3. Press the SPEED button to select the desired level, Low, Medium, High, the indicator of speed
level is lighted at indicator cover(C).
4. Press the MODE button to set the fan as Natural or Sleep mode , the mode is lighted on the
indicator cover(C) as NAT ,SLE.
5. Press the OSC button to allow the fan oscillate the wind direction, to stop the oscillation, press
the OSC button again, the maximum angle is 86 degree.
6. Press the TIMER button to set the desired auto power off time, the timer is from 0,5 to 7.5 hours,
the interval is 0.5 hour.
When not in use for long periods, the plug must always be removed from the socket.

CLEANING AND MAINTENANCE

Warning: before carrying out regular cleaning operations, disconnect the plug from the mains socket.
• To clean the appliance, use a soft, slightly damp cloth; do not use abrasive or corrosive products.
• Do not immerse any part of the fan in water or any other liquid: if this should happen, under no
circumstances should hands be put into the liquid; first disconnect the plug from the mains socket.
Then dry the appliance carefully and check that all the electrical parts are dry: if in doubt, check with
professional qualified technician.
• It is essential that the motor ventilation holes are free of dust and fibres.
• In case of long periods of non-use store the fan, protecting it from dust and moisture; we recom-
mend using the original packaging.
13