Setting Up The System; Enter Button; Cursor Button - Denon DHT-500SD Instrucciones De Operación

ENGLISH
10

SETTING UP THE SYSTEM

(1) System setup items
• Once all connections with other AV components have been completed as described in "CONNECTIONS" (see pages 6 to 9), make the various settings described below on the monitor screen using the ADV-500SD's on-screen
display function.
• Use the following buttons to set up the system:
STATUS
SETUP
ENTER
CH SELECT
RETURN DISPLAY
ANGLE AUDIO
RC-973
QUICK SETUP
SPEAKER
CONFIGURATION
DELAY TIME
CHANNEL LEVEL
LANGUAGE
SUBTITLE
TV ASPECT
TV TYPE
WALL PAPER
VIDEO OUT
VIDEO MODE
MID NIGHT MODE
RATING LEVEL
PASSWORD
16
SETUP button
MUTING
Press this to display the system setup menu.
TONE /DIMMER

ENTER button

Press this to switch the display.
Also use this button to complete the setting.
SURROUND
PARAMETER
CURSOR buttons
+
-
VCR CH
and : Use these to move the cursors (
MENU TOP MENU
PBC
to the left and right on the screen.
SUB TITLE
and Use these to move the cursors (
:
to the up and down on the screen.
Setup items and default values (set upon shipment from the factory)
Setup
Set the size of the room and the listening position.
Input the combination of speakers in your system and
their corresponding sizes (SMALL for regular speakers,
LARGE for full-size, full-range) to automatically set the
composition of the signals output from the speakers and
the frequency response.
This parameter is for optimizing the timing with which
the audio signals are produced from the speakers and
subwoofer according to the listening position.
At the listening position, listen to the test tones output
from the different speakers and set so that the playback
level from the different speakers is equal.
Set the OSD Language
Set the subtitle Language
Set the screen size for the TV being used.
Set the video system for the TV being used.
Set the wallpaper for the setup and operation screens.
Set the connector from which interlaced signal are to be
output (S-VIDEO, COMPONRNT, or SCART).
Select the desired video mode.
Set the dynamic range output when playing discs.
Make the playback restriction setting for DVDs with
restricted viewing.
Change the password.
and )
and )
Default settings
ROOM SEATING FRONT CENTER SURROUND
SPACE POSITION SP. SP.
MEDIUM SMALL SMALL
BACK
4.2m x 4.2m 2.7m (9 ft) 2.4m (8 ft) 2.1m (7 ft)
FRONT SP. CENTER SP. SURROUND SP.
SMALL SMALL SMALL
SW FREQ. = 150 Hz / SW MODE = LFE / SPEAKER OUT = SW
FRONT & SW CENTER SURROUND
2.7m (9 ft) 2.4m (8 ft) 2.1m (7 ft)
FRONT L CENTER FRONT R
SURROUND R SURROUND L
0 dB 0 dB 0 dB 0 dB
ENGLISH
OFF
4 : 3 PS
PAL
BLUE
S-VIDEO
AUTO
OFF
NO LIMIT
0000
SUB- SURR.
SP. WOOFER BACK
SMALL YES
–
2.7m (9 ft)
SUB WOOFER SURR. BACK SP.
YES NONE
SURR. BACK
–
SURR. BACK L/C SURR. BACK R
0 dB – –