Dvd Stop Button; Dvd Skip Buttons; Dvd Pause Button; Status Button - Denon DHT-500SD Instrucciones De Operación

ENGLISH
OTHER SURROUND
HALL
When playing recordings of live music, this mode
provides a feeling similar to actually being in a concert
hall.
When this mode is selected, the normal program
source is directed to the main speakers and a
reverberated sound is directed to the surround
speakers.
This mode is suited to program sources which contain
a large amount of reverberation.
CINEMA
This mode provides a three dimensional surround
effect similar to that of movie theater. With this mode,
you can enjoy a surround effect similar to Dolby
Surround sound even when playing a video program
which is not encoded with the Dolby Surround
system.
CONCERT
The reverberation of this mode produces a sound field
which recreates the sound of a stadium.
5 STEREO, 6 STEREO or 7 STEREO
The Front left channel signals are output to the
surround and surround back signal left channels,the
front right channel signals are output to the surround
and surround back signal right channels, and the in-
phase component of rhe left and right channels is
output to the center channel.
Use this mode to enjoy stereo sound.
STEREO
Sound is output from front speakers.
• When DTS or DOLBY DIGITAL is selected, the
surround sound is down mixed to 2 channel.
24
2 To check the currently surround settings, etc.
Press the STATUS button on the remote control
unit.
STATUS
Remote control unit
The surround settings and current program source
are shown on the display each time the STATUS
button is pressed.
13 PLAYBACK
(1) DVD/CD/VCD
1 3 2,4 5
BAND MEMORY FM MODE TUNING
ON/STAND FUNCTION SURROUND MODE PROGRESSIVE SCAN TONE/DIMMER
MASTER VOLUME
/SELECT
DVD SURROUND RECEIVER ADV-500SD
TITLE CHP
STANDBY DVD
PHONES P.SCAN D EX
1
OFF ON
SLEEP NTSC/PAL
VCR PWR TV IN TV PWR
CLEAR A-B REPEAT ZOOM
+
-
TV CH TV CH
RDS PTY CT RT
PROG/DIRECT REPEAT RANDOM
MODE MEMO BAND
TV VIDEO 1 VIDEO 2 TUNING /
TV VOL
+
1 2 3
DVD TUNER
-
4 5 6
TUNER
+
7 8 9
CH
-
0 +10
CALL /10
TEST TONE INPUT MODE SURROUND FUNCTION
TUNER TV / VCR
A / V DVD AV AMP
5
+
DVD
-
STATUS
MUTING
SETUP TONE /DIMMER
ENTER
SURROUND
CH SELECT PARAMETER
- +
VCR CH
RETURN DISPLAY MENU TOP MENU
PBC
1 Press the POWER switch to turn the unit on.
ON
ON/STAND
Main unit Remote control unit
2 Press the OPEN/CLOSE button.
• When you press the OPEN/CLOSE button,
the function is set to DVD automatically.
Main unit
3 Place a disc on the tray with the printed label
face up.
Never place more than one disc on the tray.
4 Press the OPEN/CLOSE button to close the
tray.
When a DVD is loaded, the playback may start
automatically.
Main unit
5 Press the PLAY button to start playback.
BAND
DVD
Main unit Remote control unit
DVD
If a title menu appears on the screen, select an item
by pressing the / / / buttons
and then press the "ENTER" button.
• Depending on the disc, you can use the numeric
buttons to select an item.
• "Title menu" may simply be called "menu" or "TOP
MENU" in the instructions supplied with the disc.
• If you press the "MENU" button or the TOP MENU
button during playback, title menu will appear on
the screen. (In some cases, the playback might
restart from the beginning of the disc automatically.)
Video CDs with PBC
When a Video CD(Version 2.0) with Playback Control
functions(PBC) is loaded, a menu will appear on the
screen.
Select an item by pressing the numeric buttons to
start playback.
• Press the 9 button to advance to the next
chapter. Press the 8 button to return to the
previous chapter.
• If you press the RETURN button during playback,
the menu will appear on the screen.
• Press the TOP MENU button to turn the PBC
function on or off.
If you press the TOP MENU button during playback,
playback will stop.
When the PBC function is off:
If you press the PLAY button (1) in the stop mode,
playback will start from the first track.
When the PBC function is on:
If you press the PLAY button(1) in the stop mode,
a menu will appear on the screen.
Select an item by pressing the numberic buttons to
start playback.