Battery Installation; Date & Time Setting; Taking Measurement - Gima 32786 Guía De Uso

13
PREPARATION

Battery Installation

1. Squeeze slightly and pull to remove the battery cover.
2. Insert 2 AAA batteries with the polarities in correct
direction.
3. Replace the battery cover. Press it lightly until the
lock securely clicks into place.
Note: Replace batteries when the battery
indicator " " shows low voltage.
Date & Time Setting
Note:
- Set the correct date and time before taking a measurement.
- Date and time should be reset after replacing new batteries.
1. Press and hold the "
2. Press the "p
3. Press the button to confirm Year Setting.
4. Follow the same steps to set the Month, Date, Hour and Minute.

TAKING MEASUREMENT

Note:
- Avoid smoking, eating or exercising for 30 minutes before taking measurement.
- Do not move or talk during measurement.
- Measurement can be taken on either arm.
Sitting Correctly
1. Relax.
2. Sit upright in a chair with your both feet on the floor.
3. Remove tight fitting clothing from you upper arm and thick
clothing. Do not roll up your sleeve if it is too tight.
4. Place your arm on a table so that the cuff will be at the same
level as your heart.
" button for a few seconds until the Year display flashes.
" or "page q" button to select the current year.
ENGLISH