Product Assembly; Operation - Easy Home MD 10229 Manual Del Usuario

Product assembly

WARNING!
Risk of injury!
Improper handling of the product may result in injury.
− Make sure that the product is unplugged during assembly.
− Make sure that the water tank is empty.
1. Lay the product upside down on a flat surface with a soft cloth or mat
during assembly to prevent scratches.
2. Place a castor
castor all the way inside (see Fig. B).
3. Check that the castor is securely attached.
4. Repeat steps 1–3 for the remaining castors.

Operation

WARNING!
Risk of electric shock!
A faulty electrical installation, excessive line voltage, or incorrect
operation may result in an electric shock.
− Once water is filled into the water tank, take extra care to
ensure that you don't tilt the product.
− Push the product gently if you wish to move it to a new
position.
− Do not remove the water tank while the product is
plugged in.
NOTICE!
Risk of damage!
Improper handling of the product may result in damage to the
product.
4 into the fitting on the underside of the product. Push the
Operation
15