Cleaning The Main Body; Cleaning The Air Inlet Cover And Inner Filter; Cleaning The Water Tank; Changing The Battery - Easy Home MD 10229 Manual Del Usuario

Cleaning the main body

1. Use a soft duster or a rag to dust off all surfaces.
2. Clean the air inlet and air outlet using a vacuum cleaner regularly.
3. Wipe all parts with a soft damp cloth dipped in mild soapy water.
4. Use a dry cloth to throughly dry the product.

Cleaning the air inlet cover and inner filter

1. Use a screwdriver to unscrew the two cover screws.
2. Remove the air inlet cover
using a vacuum cleaner (see Fig. H).
3. Use a duster to gently dust off the inner filter.
4. Replace the inner filter and air inlet cover and tighten the screws to fix it in
position.

Cleaning the water tank

− When the product or the cool function will not be used for some time, empty
the water from the water tank
− Empty the water and dry out the ice blocks
1. Before removing the water tank from the product, open the lid
make sure there is no water in the reservoir anymore (see Fig. H).
2. Wipe out the water reservoir with a damp cloth and leave it open to dry.
3. Pull the water tank out from the product and clean it with a mild soap. Rinse
it thoroughly afterwards.
4. Allow it to air dry or wipe dry using a soft cloth. Make sure the water tank is
completely dry before replacing.

Changing the battery

WARNING!
Choking hazard!
The battery is a small object. If children or animals swallow the
battery, there is a high health and choking hazard.
− Keep the battery out of reach of children.
− If you suspect a battery to have been swallowed, seek
immediate medical attention.
16 and wipe clean with a dry cloth, or clean it
.
5
Cleaning and maintenance
3 if they are in use.
2 and
19