Control Panel - Easy Home MD 10229 Manual Del Usuario

Control Panel

The remote control buttons have the same functions as those of
the control panel (see Fig. G).
On/Off button
− Press the On/Off button to turn on the product. The product starts operating
in medium speed and switches to low speed after 3 seconds.
− When the product is in operation, press the On/Off button again to switch to
standby mode.
Speed button 12
− Press the Speed button to adjust the speed.
There are three levels: Low, Medium and High.
The corresponding indicator turns on.
Swing button
− Press the swing button to start or stop oscillation from left to right.
The corresponding indicator turns on or off respectively.
Timer button
8
− Press the timer button to set the turn-off timer for the product.
The turn-off timer can be set in half hour increments from 0.5 to 7.5 hours.
There are four indicators: 0.5H, 1H, 2H and 4H.
For example, if the timer is set for three hours, the 1H and 2H indicators turn
on.
Mode button 9
There are three selectable modes, the corresponding indicator turns on.
• Normal mode: The product constantly operates in the currently set speed
setting.
• Natural mode: The product simulates the natural wind and the speed varies.
• Sleep mode: The product simulates a gentle breeze suitable for night-time
use. The speed decreases over time.
Cool button 11
− Press the cool button for a cool breeze when water is added to the water
tank 5 .
The corresponding indicator turns on.
If there is no water in the water tank, the product emits recurring beep
sounds as a warning.
− Press the cool button again to turn off the cool breeze.
The corresponding indicator turns off.
6
7
Operation
17