Louisiana Grills BLACK LABEL LG0800BL Manual Del Propietário página 11

SETTING UP A RECIPE
The Recipe function allows the user to program cooking instructions, known as Recipe Stages, for the Control Board to follow and automatically run.
These cooking instructions are a combination between Cooking temperature and Time. Starting from the first Recipe Stage (01), the Control Board
will cycle through each Recipe Stage to cook the meal. When all the Recipe Stages are complete, the Control Board will automatically switch to a low
temperature of 82°C / 180°F so that the meal stays warm until ready to serve. There are a total of nine Recipe Stages available to be programmed.
HOW TO PROGRAM A RECIPE STAGE
To set one or more of the Recipe Stages, follow the steps below:
1. Press and hold the Recipe Button. This will make the Recipe Button blink to show the Recipe settings are active. This
will also activate the Recipe Stages and the letter 'S' will be on to show it is active.
• Use the Adjustment Arrows to select the Recipe Stage. Start with the first Recipe Stage (01).
• When desired Recipe Stage is reached, press the Recipe Button to go to next setting.
2. Set the Time hours. The hours of the Time readout will blink, to show it is selected.
• Use the Adjustment Arrows to select the hours desired.
• When desired hours are reached, press the Recipe Button to go to next setting.
3. Set the Time minutes. The minutes of the Time readout will blink, to show it is selected.
• Use the Adjustment Arrows to select the minutes desired.
• When desired minutes are reached, press the Recipe Button to go to next setting.
4. Set the Cook Temperature. The Cook temperature readout will blink, to show it is selected.
• Use the Adjustment Arrows to select the desired temperature.
• When desired Cook Temperature is reached, press and hold the Recipe Button to lock in all Recipe settings for
that Recipe Stage. The Recipe Stage will then show 'CL'.
• To set another Recipe Stage, quick press the Recipe Button to select another Recipe Stage, programming
a multiple Recipe Stage cook. Repeat steps above, as desired.
Or,
• Press and hold the Recipe Button a second time to exit the Recipe settings and run the Recipe. The Recipe
Button will stop blinking.
NOTE: THE RECIPE STAGES WILL RESET WHEN THE UNIT IS SHUT-DOWN / TURNED OFF.
www.louisiana-grills.com
11