Movement Treadmill R4i Manual De Instrucciones página 96

MAITENANCE
Problem
The treadmill does
not work
The Treadmill stops
suddenly
Key defect
E1
E3
Cause
A: It is not connected to the power
supply.
B: The security key is not inserted
correctly.
C: Transformer was not installed
correctly or is defective.
D: Electrical circuit interrupted.
A: The security key has fallen.
B: Electronic system problem.
A: Key is defective.
B: Key does not work.
A: Connection wire loose or defective.
A: Defective motor or motor
connection wire.
B: Defective controller.
How to solve the problem
Connect to the power supply or put the button in
the on / on position.
Insert the security key in the correct position.
Install the transformer correctly or replace it.
Check the connecting wire and the connecting
wire terminal, and connect correctly.
Insert the security key correctly.
Request technical assistance.
Change key.
Change keyboard and wiring. Change PCB board.
Change computer.
Connect sensor wire correctly or change the wire.
Change the motor wire or change the motor
Change controller.
44