Soundcore Rave Neo Manual Del Usuario página 7

Ocultar thumbs Ver también para Rave Neo:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 35
Each time you power on your Soundcore speaker, it will automatically connect to
your last connected device if available within the Bluetooth range. If not, press
the Bluetooth button to enter Bluetooth pairing mode.
You may also control music in the Soundcore App.
TWS (True Wireless Stereo) Mode
Two identical Soundcore speakers (A3395) can pair with each other for stereo sound.
1. On both Soundcore speakers, press and hold the Bluetooth button for at least 2
seconds to enter TWS pairing mode.
2. In TWS mode, connect either speaker with your Bluetooth enabled device. The two
speakers can play music as the left channel and right channel.
Press and hold for 2 seconds Enter TWS pairing mode
Flashing white
Steady blue
Steady white
PartyCast Mode
Set up one Rave Neo as the primary speaker and connect it with more than 100+
secondary Rave Neo speakers to control audio and all the light modes.
1. Connect one Rave Neo speaker to your Bluetooth device via Bluetooth.
2. Press and hold the PartyCast button for 2 seconds on multiple Rave Neo speakers
to enter PartyCast mode.
3. When successfully connected, the PartyCast LED on the primary speakers will
continue flashing white, while on the secondary speakers will turn white.
05
EN
TWS pairing
TWS connected (Primary speaker)
TWS connected (Secondary speaker)

Publicidad

Tabla de contenido
loading

Tabla de contenido