Soundcore Rave Neo Manual Del Usuario página 8

When PartyCast mode is successfully entered:
• You can power off, adjust the volume, or switch light modes for all speakers by
controlling the primary speaker only.
• You can power off or switch light modes for each secondary speaker individually.
• You can't adjust the volume for each secondary speaker individually.
• Any secondary speaker can be switched to become the primary speaker by
pressing the PartyCast button and connecting to your smartphone. Any primary
speaker can be switched to become the secondary speaker by pressing the
PartyCast button and searching for an available primary speaker.
• To exit the PartyCast mode, press and hold the PartyCast button on any speaker
for 2 seconds.
AUX/USB Mode
Plug in a 3.5mm audio cable or insert a USB storage device, then open the
Soundcore App to select AUX or USB mode.
• When using AUX mode, control audio playback via the connected device.
Primary Speaker
Primary Speaker
>2"
Secondary Speaker
>2"
USB
USB
AUX
AUX
EN 06