Side And Back Panel Features - Albrecht AE2990 AFS Manual De Instrucciones

OPERATING CONTROL AND FEATURES
1. Function Button (Func): This button allows for activation
of the secondary feature in each of the front panel of the radio.
The features that are activated by the FUNC button are those
that are printed on the radio in blue letters. These features are
the following: MS, M/SCN, RPT, and LOCK. In addition, the
"Hi/Low" power function is controlled by the "FUNC" button,
and CH.FR toggles between Frequency display and Channel
number display. Some other (not often used) functions can be
reached by pressing a button longer.
2. Frequency Up/Down Buttons: When pressed, these
buttons are used to select channels or frequencies (in amateur
version). Press the "UP" arrow to move to a higher frequency
than is currently shown on the display. Press the "DWN" arrow
to move to a lower frequency than is currently shown on the
display. In either the "UP" or "DWN" mode, when you press

Side and Back Panel Features

and hold the frequency button
for longer than one half of a
second, the frequency
continuously move to the next
until you release the button.
3. Push-To-Talk (PTT) switch:
The receiver and transmitter are
controlled by the push-to-talk
switch. Press the switch and the
transmitter is activated: you can
now send a message.
receive, release the push-to-talk
switch. When transmitting, hold
the unit two inches from your
mouth and speaker grill area.
4. Battery Pack Latch: Sliding
this button up in its tracks allows
the battery case to be removed
once it is placed on the radio.
5. Belt Clip: Allows for ease of carrying while attached to
user's belt.
6. Flexible Wrist Strap: Place strap around the wrist to
prevent the unit from failing to the ground in the event it falls
out of user's hand.
19
will
To