m
WARNING!
To avoid serious personal injury, be sure
the unit is OFF and unplugged before clearing the air inlet.
m
WARNING!
To avoid serious personal injury, always
wear gloves to protect yourself from any sharp objects.
1. Release the On/Off switch and wait until the unit comes to
a complete stop.
2. Unplug the unit.
3. Remove the collection bag.
4. Turn the machine sideways to expose the air inlet.
Wearing protective gloves, carefully reach and remove the
material blocking the chute from the air inlet. Inspect to
ensure no damage has occurred.
5. Reinstall the collection bag. Wait 3 minutes for the motor
to cool.
6. Plug the unit back into the power supply and start the
unit. The vacuum will resume normal function.
Cleaning the Unit
m
WARNING!
To avoid serious personal injury, always
turn the unit off and unplug it before cleaning or servicing.
Use a small brush to clean the outside of the unit. Do not use
strong detergents, household cleaners that contain aromatic
oils (e.g. pine and lemon) or harsh solvents such as kerosene
as these substances can damage the plastic housing or the
handle. Wipe off any moisture with a soft, dry cloth.
1. Empty the bag after each use to avoid deterioration and
obstructing air flow, which will reduce the performance of
the mulcher.
2. Wear eye protection and a dust mask. Clean the bag as
needed. Turn the bag inside out after initial emptying and
vigorously shake out dust and debris.
3. Wash the bag once a year, or more often if needed.
Follow the steps below:
i.
Remove the bag.
ii. Unclip the 2 Velcro bands used to secure the bag on
the supporting frame, and release the string that is
used to fix the bag on the upper slot of the frame.
Remove the collection bag from the frame (Fig. 9).
Fig. 9
Collection
bag
iii. Turn the bag inside out.
iv. Hang it up.
v. Hose it down thoroughly.
vi. Leave it hanging to dry.
vii. Turn the bag right-side out and reinstall.
Storage
1. Examine the electric vacuum + mulcher thoroughly for
worn, loose or damaged parts. Should you need to repair
or replace a part, contact an authorized Snow Joe
Sun Joe
customer service center at 1-866-SNOWJOE
(1-866-766-9563) for assistance.
2. Examine the extension cord thoroughly for signs of excess
wear or damage. If it is worn or damaged, replace it
immediately.
3. Disconnect the extension cord from the vacuum before
storing.
4. Store the cord with the vacuum indoors in a clean, dry and
locked location out of the reach of children and animals.
NOTE: Devices for retaining extension cords are
commercially available should you wish to purchase one.
Service and Support
If your Sun Joe
service or maintenance, please call the Snow Joe
customer service center at 1-866-SNOWJOE
(1-866-766-9563).
Model and Serial Numbers
When contacting the company, reordering parts or arranging
service from an authorized dealer, you will need to provide the
model and serial numbers, which can be found on the decal
located on the housing of the unit. Copy these numbers into
the space provided below.
Record the following numbers from the housing or handle of your
new product:
S B J 8 0 7 E
Plastic frame
Velcro bands
9
dealer or call the Snow Joe
®
SBJ807E electric vacuum + mulcher requires
®
Model #:
Serial #:
+
®
+ Sun Joe
®
®
+ Sun Joe
®
®