Sataii_6 (Port5) - ASROCK 4Core1333-Viiv Manual Del Usuario

1. In order to enable the eSATAII port of the I/O shield, you need to connect the
orange SATAII connector (SATAII_6 (Port5); see p.2 No.22) and the eSATAII
connector (eSATAII; see p.2 No.38) with a SATA data cable first.
Connect the SATA
data cable to the
orange SATAII
connector

(SATAII_6 (Port5))

2. Use the eSATAII device cable to connect eSATAII device and the eSATAII port
of the I/O shield.
Connect one end of the eSATAII
device cable to eSATAII device
ASRock 4Core1333-Viiv Motherboard
Connect the SATA
data cable to the eSATAII
connector (eSATAII)
Connect the other end of the eSATAII
device cable to eSATAII port of the I/O
shield
3 5 3 5 3 5
3 5 3 5