Installing Windows - ASROCK 4Core1333-Viiv Manual Del Usuario

2.15 2.15 Driver Installation Guide 2.15 Driver Installation Guide Driver Installation Guide Driver Installation Guide
2.15 2.15 Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical
drive first. Then, the drivers compatible to your system can be auto-detected and
listed on the support CD driver page. Please follow the order from up to bottom
side to install those required drivers. Therefore, the drivers you install can work
properly.
If you install Windows
Root Hub" in "Device Manager" after you install "Intel Viiv Driver" from our support
CD. Please follow below steps to remove it.
1. Enter "Device Manager" and select "Universal Serial Bus controllers".
2. Right-click "USB Root Hub", choose "Uninstall", and select "OK" to save the
change.
3. Click the icon "Scan for hardware changes" on the top.
As soon as we have the updated USB driver, we will update it to our website. Please
visit our website for driver update in the future.
ASRock website
2.16 2.16

2.16 Installing Windows

2.16 2.16 Installing Windows Installing Windows Installing Windows Installing Windows
Vista Vista 64-bit With RAID Functions 64-bit With RAID Functions
Vista Vista Vista 64-bit With RAID Functions 64-bit With RAID Functions 64-bit With RAID Functions
TM TM TM TM TM
If you want to install Windows
your SATA / SATAII HDDs with RAID functions, please follow below procedures
according to the OS you install.
2.16.1 Installing Windows 2.16.1 Installing Windows 2.16.1 Installing Windows
2.16.1 Installing Windows 2.16.1 Installing Windows
RAID Functions RAID Functions RAID Functions RAID Functions RAID Functions
If you want to install Windows
RAID functions, please follow below steps.
STEP 1: Set up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set "ATA/IDE Configuration" to [Enhanced], and then in the option "Configure
SATAII as", please set the option to [RAID].
STEP 2: Make a SATA / SATAII Driver Diskette.
A. Insert the Support CD into your optical drive to boot your system.
B. During POST at the beginning of system boot-up, press <F11> key, and then a
window for boot devices selection appears. Please select CD-ROM as the boot
device.
C. When you see the message on the screen, "Do you want to generate Serial
ATA driver diskette [YN]?", press <Y>.
D. Then you will see these messages,
4 0 4 0 4 0
4 0 4 0
ASRock 4Core1333-Viiv Motherboard
® XP 64-bit OS, there may be a "!" mark on the item "USB
http://www.asrock.com
2000 / XP / XP 64-bit / Vista 2000 / XP / XP 64-bit / Vista 2000 / XP / XP 64-bit / Vista 2000 / XP / XP 64-bit / Vista 2000 / XP / XP 64-bit / Vista
®
®
2000 / XP / XP 64-bit / Vista
2000 / XP / XP 64-bit With 2000 / XP / XP 64-bit With 2000 / XP / XP 64-bit With
2000 / XP / XP 64-bit With 2000 / XP / XP 64-bit With
®
®
2000 / XP / XP 64-bit on your SATA / SATAII HDDs with
Advanced screen
/ / / / /
TM TM TM
TM TM
TM TM
/ Vista 64-bit OS on
IDE Configuration.