Kohler K-7147 Guia De Instalacion página 7

Adjusting
Rail
Adjusting
Block
Assemble Lift Rod
Components
5. Install Lift Rod Assembly
- Assemble the lift rod assembly as shown above.
NOTE If more than one lift rod is supplied, choose the one that
:
most comfortably extends to the length described below.
- To check for proper height, place the lift rod assembly on top of the
closed drain stopper. Adjust the assembly length so the eye of the lift
rod is centered over either top hole of the overflow elbow as shown
above.
Kohler Co.
Lift rod
Adjusting
Screw
Spring
7
Top Holes of
Overflow Elbow
Set Proper Height for
Lift Rod Assembly
1018154-2-
B