Care And Maintenance - Kobalt KAG 424B-03 Manual De Instrucciones

OPERATING INSTRUCTIONS
8. Using with Cut-off Wheels
CAUTION:
• To reduce the risk of injury, Read all safety
warnings and all instructions in the use, care and
protection of wheels.
• Always wear safety goggles or safety glasses
with side shields during power tool operation. If
operation is dusty, also wear a dust mask.
• A cutting guard must be installed when using a
cut-off wheel to provide maximum protection for
the operator.
• Using the cut-off wheel in a grinding operation will
cause the wheel to crack and break, resulting in serious personal injury.
The cut-off wheel is suited for small cut-off operations only. When using a cut-off wheel, hold
the tool as shown, and use only the edge of the wheel.

CARE AND MAINTENANCE

All maintenance should only be carried out by a qualified service technician.
Care of Grinding & Cut-Off Wheels
Grinding and cut-off wheels should be stored in an organized way so that wheels can be
removed without disturbing or damaging other wheels.
Cleaning
Before cleaning or performing any maintenance, remove the battery pack from the tool. For
safe and proper operation, always keep the tool and its ventilation slots clean.
Always use only a soft, dry cloth to clean your angle grinder/cut-off tool. Never use detergent
or alcohol.
8
16