Kohler K-2367 Manual Del Usuario página 3

Drain Body
Foam Gasket
(supplied with lavatory)
O-Ring
(supplied with lavatory)
Roll the O-ring onto the
drain body and seat into the
underside of the lavatory.
Washer
1. Install the Lavatory
CAUTION: Risk of product damage. Do not overtighten
connections.
For K-2369 only: Position the white foam pad on the countertop
at the installation location.
IMPORTANT! For K-2369 only: The white foam pad provided may
be placed on the countertop to enhance the color of the lavatory. If
you are planning to install your lavatory with the foam pad, use
care to not damage or mark-up the pad when locating the drain
hole location.
Position the lavatory on the countertop at the installation location.
Trace the lavatory drain hole onto the countertop.
Remove the lavatory and set aside.
For K-2369 only: Remove the foam pad and set aside.
Drill a 1-5/8" (4.1 cm) hole, at the marked location.
Optional for K-2369: Place the white foam pad on the countertop
and line up the hole in the white foam pad with the drain hole.
Kohler Co.
K-2369 Only:
Optional
Foam Pad
1-5/8" (4.1 cm)
Drain Hole
Discard gasket
supplied with the drain.
Nut
3 1095015-2-A