Kohler K-2367 Manual Del Usuario página 4

Install the Lavatory (cont.)
Discard the gasket supplied with the drain.
Slide the foam gasket onto the drain body.
Insert the drain body into the lavatory drain hole.
Roll the O-ring onto the drain body. Roll the O-ring up the drain
body until it is seated in the underside of the lavatory.
Align the lavatory and drain body assembly with the drain hole
in the countertop. Lower the drain body through the countertop
drain hole until the lavatory rests on the countertop.
Slide the washer onto the drain body.
Thread the nut onto the drain body.
Tighten the nut until secure, making sure the drain is properly
centered in the lavatory. Do not overtighten.
1095015-2-A 4 Kohler Co.