Track Programming For Recording To Tape; Automatic Tape-Programming (For Audio Cd) - Yamaha CDX-497 Manual De Instrucciones

TRACK PROGRAMMING FOR RECORDING TO TAPE

The unit can program tracks on a disc for recording onto tape. By considering the total possible recording time of the tape, the
unit automatically programs tracks or help you program tracks so they fits onto the tape with the least amount of unrecorded
space at each end of the tape.
The unit automatically programs tracks on a disc with their original order.
3
3
1
Press to stop the playback.
* The peak level search function of this unit is useful for
adjusting recording level on the tape deck. (For details,
refer to page 20.)
2
If desired, you can automatically insert additional
time space between tracks. (For details, refer to
page 11.)
SPACE
3
Press TAPE to show the total possible recording
time of the tape on the display.
TAPE
You can select any of the four tape lengths by
pressing TAPE.
(off)
90
16
En

Automatic tape-programming (for Audio CD)

1 2 3 4
5 6 7 8
9 0 INDEX
DIMMER RANDOM
REPEAT A–B PROGRAM CLEAR
SYNCHRO TAPE PEAK SPACE 2
SEARCH
AUTO SPC ON
" " appears.
TAPE 46
46
54
60
DIMMER
REPEAT A–B
4
SYNCHRO TAPE
1
TIME/INFO
FOLDER
If desired, you can also enter the total possible
recording time of the tape manually.
Example: For a C-64 tape (32 minutes on each side),
press "6" and "4".
6
4
Press REPEAT.
The unit automatically programs tracks for both side
A and side B considering the total time of the tape.
5
Start recording on the tape deck, and then press
on the remote control of this unit.
6
This unit automatically pauses at the end of the side
A. Turn the tape over to the side B, resume
recording on the tape deck, and then press
on the remote control of this unit to start
playback.
RANDOM
PROGRAM CLEAR
PEAK SPACE
SEARCH
5, 6
6
+
4
REPEAT
or