HoMedics BPA-065 Manual Del Usuario página 19

1. Press the User Select button to choose User 1 or User 2.
2. With the cuff wrapped around your arm, press the START/
STOP button. Do not inflate the cuff unless it is wrapped
around your arm. All digits will light up to check the display
functions. The checking procedure will be completed after
about 3 seconds.
3. After all symbols disappear, the display will show "00". The
monitor is ready to measure and will automatically inflate the
cuff to begin measurement. The cuff will then start deflating as
measurement continues.
4. When the measurement is completed, the
cuff will deflate entirely. Systolic pressure,
diastolic pressure, and pulse will be shown
simultaneously on the LCD screen. The
measurement is then automatically stored
into memory.
OR
18
PM