Care, Maintenance, & Cleaning - HoMedics BPA-065 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

CARE, MAINTENANCE, & CLEANING
• Clean the blood pressure monitor body and cuff carefully with
a slightly damp, soft cloth. Do not press. Do not wash cuff or
use chemical cleaner on it. Never use thinner, alcohol, or petrol
(gasoline) as cleaner.
• Leaky batteries can damage the unit. Remove the batteries
when the unit will not be used for a long time.
• Follow local ordinances and recycling instructions regarding
disposal or recycling of the device and device components,
including batteries.
• If the unit is stored near freezing, allow it to acclimate to room
temperature before use.
• This blood pressure monitor is not field serviceable. You should
not use any tool to open the device nor should you attempt to
adjust anything inside the device. If you have any problems
with this device, please contact HoMedics Consumer Relations
(contact information can be found in the Warranty section).
• DO NOT immerse the unit in water as this will result in damage
to the unit.
• DO NOT subject the monitor or cuff to extreme temperatures,
humidity, moisture, or direct sunlight. Protect from dust.
• DO NOT fold the cuff and tubing tightly.
• DO NOT disassemble the monitor or cuff. If in need of repair,
refer to the Warranty section of this manual.
• DO NOT subject the monitor to extreme shocks (do not drop
on floor).
• DO NOT inflate the cuff unless wrapped around arm.
• DO NOT wrap the cuff around body parts other than your arm.
• DO NOT drop or insert any object into any opening or hose.
24

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido