Important - Bestway Lay-Z-Spa Manual Del Usuario

To reach 40ºC (104ºF), the heating duration required is base on
the starting water temperature and ambient temperature, the
data below is purely for reference. To display the current water
temperature, run the filter system for at least a minute.
Ambient Temperature
10ºC(50ºF)
15ºC(59°F)
20ºC(68°F)
25ºC(77°F)
30ºC(86°F)
Be sure to cover the spa with the spa cover whenever the
heating function is activated. Leaving the spa uncovered will
increase the heating duration required.
Please do not use the spa when ambient temperature is lower
than 4ºC (39°F ).
SAVE THESE INSTRUCTIONS
SPECIFICATION
Power Rate
Heat Element Power
Filter Pump Power
Massage Tube Power
Jet Pump Power
Soft Water System
303021213751_14x21cm_54138;54173_

IMPORTANT !

Water Temperature
10ºC(50ºF)
15ºC(59°F)
20ºC(68°F)
25ºC(77°F)
30ºC(86°F)
220-240V AC，50Hz，Single Phase 2060W
10
HydroJet SPA _
Set Temperature Heating Duration
40ºC(104°F) 18.5h-21.5h
40ºC(104°F)
40ºC(104°F) 11.5h-14.5h
40ºC(104°F)
40ºC(104°F)
HYDROJET PRO
2,000W at 20ºC
50W
800W
1200W
10W
15h-18h
8.5h-11h
5.5h-7.5h