CONTENTS
2. Assembly ..............................................................................................
3. Operation .............................................................................................
4. Maintenance .........................................................................................
5. Troubleshooting ................. ................................................................
SAFETY INSTRUCTIONS
Carefully read, understand, and follow all information in this user
manual before installing and using the spa.
• The spa must be supplied through an isolating transformer or
supplied through a residual current device (RCD) having a rated
residual operating current not exceeding 30mA.
• The pump must be tested before each use. To test, follow the
instructions in the "Pump Test" section of this manual.
• If the supply cord is damaged, it must be replaced by the
manufacturer, service agent or similarly qualified persons in order
to avoid a hazard.
• To reduce the risk of electric shock, do not use extension cord to
connect unit to electric supply; provide a located outlet.
• No part of the appliance is to be located above the bath during
use.
• Parts containing live parts, except parts supplied with safety
extra-low voltage not exceeding 12V, must be inaccessible to a
person in spa pool; Parts incorporating electrical components,
except remote control devices, must be located or fixed so that
they cannot fall into the spa pool.
• The plug of pump shall be more than 3.5m away from the spa.
• It is necessary to have the plug accessible after installation of the
spa.
CAUTION: In order to avoid a hazard due to inadvertent resetting
of the thermal cut-out, this appliance must not be supplied
through an external switching device, such as a timer, or
303021213751_14x21cm_54138;54173_
ALL INSTRUCTIONS.
WARNING:
3
HydroJet SPA
_
P3
P11
P14
P16
TO THE STORE
P19
QUESTIONS? PROBLEMS?
MISSING PARTS?
For FAQ, Manuals, Videos Or
Spare Parts, Please Visit
bestwaycorp.com/support