Info Menu - ResMed S9 Serie Manual Clínico

Parameter
Date 9 9 9 9 9 9 9 9 9 9 9 DD Mmm YYYY
Time
9 9 9 9 9 9 9 9 9 9 9
Configuration
Language 9 9 9 9 9 9 9 9 9 9 9 English / Français /
Restore 9 9 9 9 9 9 9 9 9 9 9 Yes / No
factory
defaults
Pressure 9 9 9 9 9 9 9 9 9 9 9 cm H
units
Temperature 9 9 9 9 9 9 9 9 9 9 9 °F / °C
units
Height units 9 9 9 9 9 9 9 9 9 9 9 cm / inches

Info menu

Service
Parameter Description
Run hours Displays the total number of hours the device has been used including warm-up and
cool-down times for the humidifier.
SW Displays the current software version.
BID Displays the boot loader ID.
VID Displays the variant ID.
AID Displays the alarm software ID
HID Displays the humidifier software ID.
Modes
Displays the device run hours, software version and other component
versions.
Range Description
Sets the current date or
time. If you set a new
00:00 (24 hr)
date or time that occurs
in the past then an 'Invalid
date/time, data exists for
this period' message is
displayed.
Sets the display language.
Deutsch /
Español /
Português
Default: English
Resets machine default
settings (except for
language, date and time).
O / hPa Sets pressure unit.
2
Default: cm H O
2
Sets temperature unit.
Default: °F
Sets height unit.
Default: inches
19
English