Moisture Condensation - Sony CFI-1015B Guía De Seguridad

• Do not touch the plug of the AC power cord with wet hands.
• Protect the AC power cord from being walked on or pinched particularly at plugs,
expansion receptacles and the point where the cord exits from the console.
• Do not place heavy items on the cord.
• Do not place the AC power cord near heating equipment and do not expose the cord
to heat.
• Unplug the AC power cord from the electrical outlet before cleaning or moving the
console, or when you do not intend to use the console for an extended period of time.
When disconnecting, grasp the AC power cord by the plug and pull straight out of the
electrical outlet. Never pull by the cord and do not pull out at an angle.
• Do not connect the AC power cord to a voltage transformer or inverter. Connecting the
AC power cord to a voltage transformer for overseas travel or an inverter for use in an
automobile may cause heat to build up in the console and may cause burns or a
malfunction.
Never disassemble or modify the console or accessories
Use the console and accessories according to the instructions in the product
documentation. No authorization for the analysis or modification of the console or
accessories, or the analysis and use of its circuit configurations, is provided. There are no
user serviceable components inside the console.
Network
• A broadband connection is required to access the internet. Note that dial-up
connectivity is not supported.
• You are responsible for internet service fees. For details, refer to the information
provided in your service contract or contact your internet service provider.
• Do not use a cord for a standard residential telephone line or cables of types other
than those mentioned here. Using the wrong type of cord or cable can cause more
electrical current than necessary to flow through the LAN port, which may lead to heat
build-up, fire or malfunction.
Wireless networking feature
• The frequencies used by the wireless networking feature of this product are the 2.4
GHz (WLAN, Bluetooth®)/5 GHz (WLAN) ranges. The 2.4 GHz range of radio waves is
shared by various devices. This product has been designed to minimize the effect of
other devices using the same range. However, in some cases, interference from other
devices may reduce the connection speed, shorten the signal range, or cause the
connection to be terminated unexpectedly.
• When using the console scan function to select a wireless LAN access point, access
points that are not intended for public use may be displayed. Only connect to an
access point that you are authorized to use.
6

Moisture condensation

If the console is brought directly from a cold location to a warm one, moisture may
condense inside the console. Should this occur, the console may not operate properly. In
this case, turn off and unplug the console until the moisture evaporates (this may take
several hours). If the console still does not operate properly, contact SIE Consumer
Services.