Moisture Condensation - Sony Psp2 SCPH-70011 Manual De Instrucciones

Moisture condensation

If the console or disc is brought directly from a cold location to a warm one, moisture
may condense on the lens inside the console or on the disc. Should this occur, the
console may not operate properly. In this case, remove the disc and turn off and
unplug the console. Do not put the disc back in until the moisture evaporates (this
may take several hours). If the console still does not operate properly, call SCEA
Consumer Services at 1-800-345-7669 for assistance.
Cleaning
• For safety reasons, before cleaning the console or connected accessories, 1) turn
off the console, 2) disconnect the power plug for the console from the electrical
outlet, and 3) disconnect the network cable or phone cord from the console.
• If the exterior of the console becomes dirty, soak a soft cloth in a mild detergent
solution diluted with water, tightly squeeze the cloth to remove the excess liquid,
wipe the affected area of the exterior, and finish by wiping with a dry cloth. Avoid
wiping the front vents with a damp cloth.
• When dust accumulates in the console vents, remove the dust with a low-powered
vacuum cleaner.
• Do not touch the lens located inside the disc cover. To help protect the lens from
dust, keep the disc cover closed except when inserting or removing discs.
Differences with previous PlayStation
This version of the PlayStation 2 console may be different from previous models
®
in compatibility with optional accessories and the method of operating game
software. For full details contact SCEA Consumer Services at 1-800-345-7669 or
visit our Web site at www.us.playstation.com
2 models
®
US
Precautions 9