Moisture Condensation - Sony PlayStation 2 SCPH-79010 Manual De Instrucciones

Moisture condensation

If the console or disc is brought directly from a cold location to a warm one, moisture
may condense on the lens inside the console or on the disc. Should this occur, the
console may not operate properly. In this case, remove the disc and turn off and
unplug the console. Do not put the disc back in until the moisture evaporates (this
may take several hours). If the console still does not operate properly, call our
technical support line at 01-800-759-7669 or 5002-9819 for assistance.
Cleaning
• For safety reasons, before cleaning the console or connected accessories, 1) turn
off the console, 2) disconnect the power plug for the console from the electrical
outlet, and 3) disconnect the network cable from the console.
• When cleaning the console, use a soft, dry cloth. Do not use solvents or other
chemicals or a chemically-treated dust cloth to clean the product.
• When dust accumulates in the console vents, remove the dust with a low-powered
vacuum cleaner.
• Do not touch the lens located inside the disc cover. To help protect the lens from
dust, keep the disc cover closed except when inserting or removing discs.
Exterior protection
To help prevent damage to the painted parts, follow the precautions below:
• Do not spill liquids such as alcohol, solvents or other chemicals on the product.
• Do not place any rubber, vinyl or plastic items on the painted surfaces for an
extended period of time.
Differences with previous PlayStation
This version of the PlayStation
in compatibility with optional accessories and the method of operating game
software. For full details contact our technical support line at 01-800-759-7669 or
5002-9819 or visit our Web site at www.sony.com.mx/playstation/.
64
Precautions
2 models
®
2 console may be different from previous models
®