Brandt BWT 6310 E Manual De Instalación Y De Instrucciones página 13

1 -
3 - PROGRAMMING
A
DDING OR REMOVING AN ITEM DURING THE
CYCLE (impossible during spin)
— Press the «Start/Pause» button
the washing cycle. On the display
flashes (Diagram 3.2.6) .
— Insert or remove the linen.
The time that the lid remains locked depends
on the temperature inside the machine and
for safety reasons, may not be released for several
minutes if a cycle of over 40°C is interrupted.
— Press the «Start/Pause» button
D the two dots flash (Diagram
On the display
3.2.7) .
NB : If you have selected a delayedt start, you can
access the drum instantly at any time in the period
before the washing cycle starts without having to
interrupt and restart the cycle.
M
ODIFICATION OF THE PROGRAMME IN PROGRESS
During the washing cycle or during the delayed start
period, you can make certain modifications :
— Select another programme, another spin dry
speed or modify the options. Depending on how far
the programme has advanced, not everything may
be possible.
C
ANCELLING A PROGRAMME IN MID
WHEN PAUSED
— Turn the programme selector
tion «0». The lights and the display
ched off.
This operation may be made at any time, during the
cycle or when programming or even when paused.
NB : In all cases, cancelling a programme means
that you have to re-programme everything from the
start again.
E
ND OF THE WASHING CYCLE
D
The display shows the washing cycle is comple-
ted at the end of the programme (Diagram 3.2.8) .
— Place the programme selector
position «0».
— Open the lid and remove the linen.
Certain models automatically position the drum with
the opening at the top to make it easier to take the
linen out. This operation only lasts 3 minutes at
most.
(continued)
F
to interrupt the
D the time
F
to re-start washing.
-
CYCLE OR
A
to the stop posi-
D
will be swit-
A
to the stop
13
P
45 min
A
ROGRAMME OPTI
Programme at 40°C for washing 3 kg or cotton or
mixed fabrics in 45 minutes, ensuring perfect
results.
P
30 min
ROGRAMME FLASH
This programme allows you to wash a 2.5 kg load of
not very dirty COTTON, WHITE, COLOURS or
RESISTANT SYNTHETIC linen.The cycle time is
restricted to around 30 minutes. In this programme,
the washing temperature is automatically program-
med at 30°C.
Important : For this programme, the doses of
detergent should be reduced by half.
O (
PTION PREWASH
To remove earth, sand, blood, ... it allows the wash-
ing to be continued in clean water.
The detergent is to be put into the pre-wash
compartment
(Diagram 2.2) .
O (
PTION RINSE PLUS
Add an extra rinse. Recommended for sensitive
skins.
O
PTION EASY IRONING
Wash and spin dry speeds adapted to avoid crum-
pling of the linen.
F
ONCTION DRIP DRY
This function, for very delicate linen, enables you to
remove spinning and to pass directly to the draining
of the washing machine.
F
ONCTION FULL DRUM STOP
This function enables you to remove the washing
from your machine before the spin phase or to delay
this phase with you washing remaining in water to
prevent creasing.
When the machine is stopped with the drum full, the
D
display shows alternately Diagram 3.2.9 to
3.2.10.
You can then just empty it (position «100») or with a
spin dry cycle. The programme will stop automati-
cally.
)
of the product drawer
)
( )
(100 tr/min)
( )
EN