Regular Care - Brandt BWT 6310 E Manual De Instalación Y De Instrucciones

1 -
3 - PROGRAMMING
Programmes table
Type of textile
COTTON
SYNTHETICS
WOOL / DELICATES
Special programmes
Opti A45 min
Flash 30 min
Special programmes
Rinsing
Spinning
T
EST PROGRAMMES ACCORDING TO DELEGATED REGULATION
- Standard cotton programme at 60°C : Cotton - 60°C - no option - max spin.
- Standard cotton programme at 40°C : Cotton - 40°C - no option - max spin.

4 - REGULAR CARE

4.1 - A
VOIDING BAD SMELLS
Respect the installation instructions for the drain
hose described in paragraph 1.3, leave the lid open
after the cycle has finished. Once a month run a
cycle at 60°C or 90°C.
4.2 - P
RODUCT DRAWER
— Release the drawer by pressing the Bumps
puyll it towards you. Remove the siphons
C
separate the drawer
— Rinse everything under the tap.
— Refit all of the parts of the drawer, then fit it back
under the lid of the machine.
EN
(continued)
(Diagram 4.1)
D
from the trim .
Maximum
Temperature
weight of
(°C)
dry clothes
20° - 90° 6,0 kg
cold - 60° 2,5 kg
cold - 30°
1,5 kg
40° 3,0 kg
30° 2,5 kg
-
-
(
UE
4.3 - P
UMP FILTER
— Release the part
pushing a pen into the hole
right.
— Turn the drum towards the front.
— Remove the pump filter
that may be inside and rinse everything under the
tap.
A ,
— Refit both parts
B ,
— Push the part
4.4 - O
UTSIDE PANELS
Use liquid soap. Do not use abrasive products or
scourers. Dry with a soft cloth.
14
-
-
) °1061/2010
N
(Diagram 4.2)
A
at the bottom of the drum by
B and push it to the
C
, remove any objects
C A
and .
A
to the left until it clicks into place.
100