Electrical Micromotor (Optional); Electrical Micromotor Basic Adjustments; Electrical Micromotor Adjustments - Multifunction Display (Optional); Brushless Electrical Micromotor - Side Panel (Optional) - Olsen Logic Plus Guía De Operación

- Electrical Micromotor (Optional)

Before starting the operation, connect the handpiece to
the electrical micromotor (2).
To activate the rotation: push the propulsion/activation
pedal (1).

6.8.1 - Electrical Micromotor Basic Adjustments

To adjust the speed: turn the control knob (3) until the desired speed
is reached.
To change the direction of rotation: use the rotation direction control (4).
FWD: clockwise;

6.8.2 - Electrical Micromotor Adjustments - Multifunction Display (Optional)

When removing the electrical micromotor from the holder
or extending the rod (Cross Flex), the multifunction display (5) will
identify the electrical micromotor, the number of its position on
the working table (1 to 5), the direction of rotation and will show
the speed bar.
To adjust speed: use keys to increase (7) or decrease (6)
speed.
To change the direction of rotation: use the key (8) to toggle
the direction of rotation.
(FWD) Clockwise

6.8.3 - Brushless Electrical Micromotor - Side Panel (Optional)

Before starting the operation, connect the
handpiece to the electrical micromotor (16).
To activate
propulsion/activation pedal (14) or the Manual Start
key (11). The On/Off indicator (2) will turn blue.
To select a preset program: use the Program
key (8). There is 7 programs available, according the
table below:
The selected program is shown on the display (1).
To record program: select program P1 or P2, then select the desired
gear ration and adjust the speed. Press and hold the Program key (8) until
the confirmation of the system.
To adjust speed: use the adjustment keys (13) to increase or decrease speed. Please see the table below
for speed range for each gear ration value.
OFF: Off;
(REV) Counterclockwise
the rotation: press
REV: counterclockwise.
the
17