Cylinder Cover - ICS 680ES Manual De Mantenimiento

680ES SERVICE MANUAL
10 This section covers the disassembly and assembly of the cylinder cover.
Removal of the air intake components and front handle is necessary. Refer
to sections 1 and 14 if needed.
10.1
Remove the air filter mount screws.
10.2
Remove the cylinder cover screws (3).
10.3
Remove spark plug lead from cylinder
cover.
10.4
Remove fuel tank breather cap and
clamp.
10.5
Partially remove intake manifold from

cylinder cover.

10.6
Remove cylinder cover.
A. Pull up on front.
B. Push intake manifold through hole.
C. Make sure throttle linkage is
disengaged from cylinder cover.
D. Guide fuel breather tube and
compensator tube through cylinder
cover.
© 2020 ICS- Blount Inc Specifications and pricing are subject to change without notice. P/N 598000 REV01162020
10. CYLINDER COVER
35