Double Bagger Usage
NOTE:
When both grass bags are full, place the tractor on a firm, level surface, disengage the PTO, turn
the tractor engine off and set the parking brake.
1.
Open bagger cover by pushing in on the rear side tabs with your hand (1),
and lifting the cover with your other hand in the center rear of the bagger
cover (2) as shown in Figure 32.
2.
Do not remove the hose from the tractor.
3.
Remove both bag assemblies from the hanger rails by lifting the back edge
up first, and then sliding the front edge out and up until it is clear of the
frame. See Figure 33.
4.
Empty the grass clippings at a proper disposal site, use the handle at the
bottom of each grass bag. Holding the bag firmly, empty the contents.
5.
Replace grass bags, close lid, flip down seat, restart your tractor, release
parking brake and resume cutting your grass.
2
Figure 32
OPERATION
2
1
Figure 33
1
9