Program Selection - Whirlpool AGB 669/WP Manual De Instalación De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 50
8.3 FIRST DAILY USE (Tank and boiler empty)
Activate the wall switch. Two small illuminated points on the display will turn on; the led indicator on the left of the
switch
will be lit red in order to indicate that the machine is receiving electrical current; Position the
overflow and close the hood.
-
Press the general power
and the machine begins to fill itself. The
completed it will stop flashing and will remain a steady green
-
Select the desired washing time by means of the
that upon first use the machine is positioned automatically on a medium cycle
indicator relative to the selected cycle turns on. The led indicator flashes until the end of the wash cycle,
after which it turns a steady green again. To start the cycle, open the hood, insert the basket and close the
hood; the selected led indicator will begin to flash and will stop flashing at the end of the completed cycle.
-
The display will indicate the wash or rinse temperatures based upon the active function of the machine.
Note: if the machine came equipped with rinse delay, the wash will continue until the programmed rinse
temperature is reached, after which the cycle will terminate. After having selected the continuous cycle
the led indicator
the cycle will terminate once the led indicator
drain pump, remove the overflow and press
turns on, and will terminate with the automatic shutdown of the machine.
PROGRAM
Glasses
Glasses, cups, very dirty plates
Silverware and very dirty plates
Particularly dirty dishes
(*)The cycle durations indicated above are based upon a tri-phase connection with a 50°C hot water
supply.
Where a cold water supply is used, the duration of the cycle could increase in relation to the input water
temperature.
button. The led indicator to the right of the button
will start to flash. To interrupt the cycle press
9

PROGRAM SELECTION

WASH TYPEOLOGY
led indicator will begin to flash. Once filling has been
becomes a steady green.When finished, for models with a
for 4 seconds. Drainage will begin once the led indicator
Brief about 1' 15"
Medium about 2'
Long about 3'
Continuous from 0 to 10'
turns green
selectors, keeping in mind
. The green led
again. The rinse will begin and
DURATION (*)
,
10

Publicidad

Tabla de contenido
loading

Tabla de contenido