Personal Safety - Casals VNC50 Manual De Uso

- Do not force the power cord. Never use the
power cord to lift up, carry or unplug the
appliance.
- If using the appliance outdoors, use a
suitable cord extension.
- As an additional protection to the electrical
supply for the appliance, it is advisable to
have a differential current device with a
maximum sensitivity of 30 mA. Ask for advice
from a competent installer.
- Do not touch the plug with wet hands.

Personal safety:

- Keep any possible distractions well away
from you when using the appliance as they
may cause you to lose your concentration.
Use common sense when operating the
appliance. Do not use it when tired or under
the effect of drugs, alcohol or medication.
A moment of inattention while operating
this type of appliance may result in serious
personal injury.
- Use safety equipment. Always wear eye
protection. Safety equipment such as dust
mask, non-skid safety shoes, hardhat, or
hearing protection used for appropriate
conditions will reduce personal injuries.
- Avoid accidental starting. Ensure the
switch is in the off-position before plugging
in. Carrying power tools with your fingers on
the switch or plugging in power tools that
have the switch in invites accidents.
- Remove the tool fastening key(s) before
starting up the appliance. A key or tool that
is not well fastened to the appliance may
cause accidents on start-up.
- Do not overreach. Keep proper footing and
balance at all times. This will allow you to
maintain control of the appliance at all times.
- Dress properly. Do not wear baggy or loose-
hanging clothes or accessories. Keep your
hair, clothing and gloves away from moving
parts. Loose clothes, jewellery or long hair
can be caught in moving parts.
- Use clamps or a vise to secure the object to
be worked in place. The work will be safer if
both hands are free to control the tool.
- Do not touch any of the appliance's moving
parts while it is operating.
- Do not touch the blade or the workpiece
immediately after operation. They might be
extremely hot and burn you.
- Protect yourself from contact with and the
inhalation of dust created by sanding wood
and metal surfaces and surfaces coated with
lead paint. Use protective equipment that
complies with the appropriate health and
safety regulations.
- Exercise precaution after employing the
stop operation on the appliance as the tool
will continue moving from the effect of its
own mechanical inertia.
Use and care:
- Fully unroll the appliance's power cable
before each use.
- Do not use the appliance if its accessories
are not properly fitted.
- Do not use the appliance if the accessories
or consumables attached to it are defective.
Replace them immediately.
- Use the appliance handle/s, to catch it or
move it.
- Do not force the appliance's work
capacity. Use the correct power tool for each
application. The correct power tool will do the
job better and safer at the rate for which it
was designed.
- Do not use the appliance if the on/off
switch does not work.
- Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools. Such
preventative safety measures reduce the risk
of starting power tools accidentally.
- This appliance is not for professional or
industrial or medical/hospital use, it is