Auto-Parking Icon
When the mower stops driving on a slope if the operator has opened the steering levers and is off the seat without setting
the park-brake pedal at the braking position, the mower will automaticly park on the slope using the battery power. The
auto-parking icon will flash, meanwhile the beeping indicator will sound continously.
Set the park-brake pedal in the braking position. The auto-parking icon will be off and the beeping indicator will no longer
sound.
WARNING: When the battery power is depleted, the mower can slide down the slope, which may cause
serious mower damage or personal injury!
USB Icon
Illuminates to indicate that a USB device can work after the mower is started correctly.
Load Indicator
Indicates the current load of the mower. When the load is in the ECO range, the mower is under normal load. When the
load is in the PWR range, the mower is under heavy load. When in the CHG range, the mower is in the energy-recycle
mode, such as braking or driving downhill.
Fuel Gauge
Indicates the average charge capacity of the inserted batteries.
Low-Power Indicator
◾
When the available battery charge is too low, the mower will go into Limp-Home mode. The low-power indicator will
flash every second. The operator should stop working and go to the battery charging area as soon as possible.
◾
When the battery is nearly depleted, the low-power indicator will flash in every half a second.
Fault Code Indicator
The on-board computer system will take action to protect the operator and the machine when it detects an issue. When it
acts to turn off the machine or a component, it will indicate that a fault has occurred, and that fault code will be shown on
the LCD screen. Please see "FAULT CODE & STATUS INDICATOR REFERENCE" section in this manual for reference.
Overload Indicator
When the mower is overloaded, the overload indicator will flash every second. Meanwhile, both the LED fuel-gauge &
status indicator on the front of the foot-area and the mower status indicator on the LCD screen and will flash RED every
second. The beeping indicator will sound once.
It is recommended that the operator should raise the deck cutting height to reduce the load of the mower when the over-
load indicator flashes.
Over-heat Icon
◾
When the battery is overheated, the over-heat icon will flash every second and the battery icon representing the
overheated battery will blink.
◾
When the mower is overheated, the over-heat icon will flash every second. The LED fuel-gauge & status indicator
on the front of the foot-area and the mower status indicator on the LCD screen will flash RED every second. The
beeping indicator will sound once.
It is recommended that the operator should reduce the load of the mower by raising the deck cutting height or slowing
the blade/driving speed. Allow the battery pack or the mower to cool.
20
56-VOLT LITHIUM-ION ELECTRIC ZERO TURN MOWER — ZT4200L/ZT4200L-FC