Ego Power+ ELECTRIC ZERO TURN Manual Del Operador página 64

LCD
Description
Display
PTO Switch icon blinks
Steering lever icon blinks
Energy recovery icon blinks
occasionally.
PCBA controlled left
driving motor fails.
Plug (Triple-phase,
power wire) con-
necting the left driv-
ing motor with the
corresponding PCBA
Left driv-
is loosened.
see "Fault ing motor
code"
does not
Plug (Six pins, signal
rotate.
wire) connecting the
left driving motor
with the corre-
sponding PCBA is
loosened.
Left driving motor
fails.
64
56-VOLT LITHIUM-ION ELECTRIC ZERO TURN MOWER — ZT4200L/ZT4200L-FC
LED
Fault code
Status
on LCD
Indicator
n/a OFF
n/a OFF
n/a OFF
413 OFF
317 OFF
301 OFF
317 OFF
Beeper Cause
The blade
motor was
interrupted
in operation
No
and the PTO
switch is
not set to off
position.
The driving
motor was
interrupted
in operation
No and the
steering le-
vers are not
set to open
position.
The kinetic
energy gen-
erated dur-
ing braking
or driving
No downhill is
converted
into electric-
ity to charge
the battery
packs.
One beep PCBA failure
Loose con-
One beep
nection
Loose con-
One beep
nection
Motor
One beep
failure
Solution
Before restarting the mower, push
the PTO switch downward to dis-
engage the deck motor. Please see
"TROUBLESHOOTING" section in
this manual for reference.
Before restart the mower, move the
steering levers to the open position.
Please see "TROUBLESHOOTING"
section in this manual for reference.
This is normal operation. No action
is needed.
Have repairs performed by a quali-
fied service technician.
Have repairs performed by a quali-
fied service technician.
Have repairs performed by a quali-
fied service technician.
Have repairs performed by a quali-
fied service technician.