Humidifier Quick Set Up - Aircare Space Saver Serie Configurar La Guía Y El Manual Del Propietario

HUMIDIFIER QUICK SET UP

Use these basic instructions for setting up your unit.
Use the "Detailed Set Up" on page 6 for additional set up and operational information.
NOTE: To simplify instructions, model 836000HB is featured in most illustrations.
Images of the 831000 unit are included where needed.
UNPACK HUMIDIFIER
a. OPEN THE CARTON AND LIFT OUT OF THE CHASSIS (TOP SECTION)
b. NOTE THE FLOAT ROD STICKING UP THROUGH THE INNER PACKING.
c. CAREFULLY FREE THE FLOAT ROD FROM THE CARDBOARD PACKING.
d. REMOVE THE CARDBOARD INNER PACKING.
e. DO NOT THE DISCARD THE SMALL STYROFOAM CUBE. IT IS NOT PACKING.
LIFT OUT THE CHASSIS
INVERT THE BASE AND
INSTALL THE CASTERS
INSERT
CASTERS
UNTIL
SHOULDER
IS FLUSH
WITH FLOOR
OF BASE
FOR HELP, CALL 1.800.547.3888 OR VISIT AIRCAREPRODUCTS.COM
UNPACK UNIT
REMOVE THE FLOAT ROD
FROM PACKIN
ASSEMBLE CONTENTS OF BASE
ENSURE THE STY-
ROFOAM FLOAT IS
ATTACHED
TO FLOAT ROD
G
2
REMOVE THE
PARTS BAG
AND OTHER CONTENTS
FROM BASE
INSTALL THE FLOAT
ROD IN THE BASE
TWIST
RETAINER
TO SECURE
FLOAT ROD