Humidifier Quick Set Up - Aircare 4DTS900 Guía De Configuración

HUMIDIFIER QUICK SET UP

Use these basic instructions to quickly set up your unit. Use the "Detailed Set Up
Instructions" on page 6 for additional set up and operational information.
UNPACK HUMIDIFIER
1. OPEN THE CARTON AND REMOVE PACKING AND LITERATURE ON TOP.
2. LIFT OFF THE CHASSIS, THEN PULL THE CABINET OUT OF THE CARTON.
ASSEMBLE THE UNIT
1. EMPTY THE CABINET OF ALL
CONTENTS AND INVERT IT TO
INSTALL THE CASTERS.
3. INSTALL THE FLOAT ASSEMBLY
INTO THE ROUND GUIDES ON THE
FLOOR OF THE BASE WITH THE
TWO SCREWS AND A PHILLIPS
SCREWDRIVER.
FOR HELP, CALL 1.800.547.3888 OR VISIT AIRCAREPRODUCTS.COM
VERIFY CONTENTS INSIDE CARTON
•
•
•
•
•
•
•
REMOVE CASTERS
FROM PARTS BAG,
AND INSERT THEM
UNTIL SHOULDER
IS FLUSH WITH THE
FLOOR OF BASE.
FILLER HOSE
FOUR CASTERS
WICK
TWO WATER BOTTLES WITH CAPS
FLOAT AND SUPPORT WITH TWO SCREWS
AIR FILTER
MANUAL
2. TURN THE CABINET OVER TO IN-
STALL CONTENTS. REMOVE THE TWO
SCREWS TAPED TO THE FLOAT SUP-
PORT. INSERT THE FLOAT INTO THE
FLOAT SUPPORT.
4. INSTALL THE WICK INTO THE CAB-
INET FLOOR. HOOK THE FRAME
ONTO THE LEDGE AT
THE BACK.
2
FLOAT
SUPPORT
FLOAT