Operation; Model 836000Hb; Model 831000; Common To All Models - Aircare Space Saver Serie Configurar La Guía Y El Manual Del Propietario

OPERATION:

Model 836000HB (analog controls with digital display screen)
Turn On and Set Controls
Press the fan/power knob
1.
appear on the display.
Rotate the fan knob
2.
level. The fan speed proceeds from low (F1) to high
(F3). NOTE: The knob will rotate freely clockwise.
To decrease the fan speed, turn the knob counter-
clockwise.
Rotate the humidity knob
3.
percentage of desired humidity. The range for set-
ting the humidity is from 25% to 65%, and goes up
in 5% increments. Lower the level by rotating the
humidity knob counterclockwise.
Model 831000 (full digital controls)
Turn On and Set Controls
1. Press the power button
Two dashes (--) will appear on the display.
Adjust the fan speed by pressing the fan
2.
button . The display will show the fan
speed as it proceeds from low (F1) to high (F3).
Press the humidity button
3.
age of desired humidity. The range for setting the
humidity is from 25% to 65% and goes up in 5%
increments as the button is pressed. Once 65% is
the cycle starts over again at 25%.
reached,

Common to All Models

Humidifier Status Indications
Refill Indication: When the reservoir is empty, an F displays on the LCD screen.
Check Filter: After every 720 hours of operation a reminder to check the
filter/wick condition is programmed to show CF on the display. Check the
condition of the filter/wick, and change it if necessary. Clear the CF display
by unplugging the humidifier, waiting 60 seconds, and plugging it back in.
Control Lock: You can lock the controls to avoid unwanted changes to
your settings by pressing and holding the power button down for five
seconds. CL will display for a few seconds, then resume displaying room
humidity. Turn off this feature by holding down the power button for five
seconds.
FOR HELP, CALL 1.800.547.3888 OR VISIT AIRCAREPRODUCTS.COM
.
once to turn the unit on. Two dashes (--) will
clockwise to set the fan
clockwise to set the
once to turn unit on.
to set the percent-
8
35
35