Bt Connection - auna iTuner 320 ME Manual De Instrucciones

EN
82
DAB station search
• Press the button on the unit or the SCAN button on the remote
control to start the channel search. The progress of the search is
indicated by a bar on the screen.
• As soon as the station search is finished, the radio selects the first
alphanumeric station it finds and starts playing.
Calling up stored stations
• Press and hold the Fav- key to save a station.
• You can store up to 20 stations.
• To recall a stored station, press the Fav- button on the unit or press the
Fav- and remote control buttons.

BT CONNECTION

• Select an audio source
• Press the OK button until "BT" is displayed on the screen.
• Make sure that no other BT device is connected to your device.
• "No Connection" is displayed on the screen.
• Enable "BT" on your external device.
• Search for your radio in the external device's device list.
• Select your device from the device list. If a password is required, enter
"0000" (four zeros).
• Some devices may require additional confirmation of the connection.
• Once the connection is successfully established, "Connected" will be
displayed on the screen of your device.
• Start BT playback on your external device.
• You can control BT playback from your external device or from your
device. The volume can be adjusted on both devices.
• The BT connection can be interrupted by pressing OK for three seconds.
The message "No Connection" is displayed on the screen.