Making The Electrical Connection - HAMPTON BAY 52656 Guía De Uso Y Cuidado

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Assembly - Hanging the Fan (continued)
5
Hanging the fan
WARNING: The hook is only to hold the fan while attaching
wiring. Failure to hang the fan properly by following these
instructions may result in the hook breaking, causing the fan
to fall. The hook must pass from inside to the outside of the
canopy.
Carefully lift the fan motor assembly (D) up to the mounting
bracket (A).
Seat the hanger ball portion of the ball/downrod assembly (B)
in the mounting bracket socket. Ensure that the tab on the
mounting bracket (A) socket is properly seated in the groove
in the hanger ball. If using close-to-ceiling mounting, hang the
fan on the hook provided by utilizing one of the holes at the
outer rim of the ceiling canopy (C).
6

Making the electrical connection

WARNING: Each wire nut supplied with this fan is designed to
accept up to one 12-gauge house wire and two wires from the
fan. If you have larger than 12-gauge house wiring or more than
one house wire to connect to the fan wiring, consult an electrician
for the proper size wire nuts to use.
WARNING:
Use the wire connecting nuts (BB) supplied with your
fan. Secure the connectors with electrical tape and ensure there
are no loose strands or connections.
Connect the ground conductor of the 120-Volt supply (this
may be a bare wire or a wire with green colored insulation) to
the green ground lead(s) (KK) of the fan using a plastic wire
connecting nut (BB). When using standard ceiling mounting,
there are two green grounding leads; one from the ceiling
mounting bracket and one from the ball/downrod assembly.
When using close to ceiling mounting, there is only one green
grounding lead from the ceiling mounting bracket since the
ball/downrod assembly is not used.
If you are using the optional light kit, connect the fan light
supply blue wire (LL) and the fan supply black wire (MM) to
the black household supply wire (MM) using a plastic wire
connecting nut (BB).
Connect the neutral fan white wire (NN) to the white neutral
household wire (NN) using a plastic wire connecting nut (BB).
After connecting the wires, spread them apart so that the
green (KK) and white wires (NN) are one side of the outlet box
(OO) and the black wire (MM) is on the other side.
Turn the wire connecting nuts upward, and carefully push the
wiring into the outlet box (OO).
A
C
D
MM
9
Please contact 1-877-527-0313 for further assistance.
OO
LL
NN
NN
HAMPTONBAY.COM
A
B
C
D

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

742-457

Tabla de contenido