Publicidad
Idiomas disponibles
Idiomas disponibles
ADVISE HOW TO USE AND MAINTAIN YOUR HELMET
Take care of your helmet; it will protect you in case of crash. Do
not modify the structure of the helmet since it is designed to
of some of its parts. Do not expose your helmet to temperatures
the helmet. Direct contact with paints, adhesives, fuels, solvents
or corrosive products may damage the structure of the shell.
HELMET SIZE
Surround your head just above the ears with a measure tape and
one, since the internal lining of the helmet is enlarged with use.
PUTTING THE HELMET ON
Adjust and fasten the chinstrap correctly and make sure that
the helmet is correctly placed on your head, it protects both the
forehead and the neck (B). Do not incline the helmet backwards
(C) nor forwards (D).
MAINTENANCE OF THE VISOR
kind of solvents, alcohol or abrasive products on the visor. Badly
replaced before riding for safety reasons.
REMOVING / FITTING THE CLEAR VISOR
-Disassembly: Open the visor completely and move the lever
E) is released, the visor will come out of the
O W N E R S M A N U A L
helmet (F), do the same with the other side of the visor.
-Assembly: Follow the steps described above in reverse.
CLEANING THE INTERNAL LINING
This helmet is provided with a removable and washable lining.
Please wash by hand with water and mild soap and let dry,
avoiding direct exposure to sunlight.
REMOVING / FITTING THE INTERNAL LINING
A). Choose a helmet
housing and pull the side gently up to Remove the padding.
Releasing the side pad.
located on the back of the Hull (J
SUN VISOR
To operate the sun visor, pull the lever back to lower the sun
visor(L) and forward to hide it (M).
NOSE PROTECTOR
REFLECTIVE STICKERS
I) out of its
K).
N).
G).
H),
Publicidad
